Brute Force Detection

BFD -- Brute Force Detection

BFD is a shell script which parses security logs and detects authentication failures. It is a brute force implementation without much complexity, and it works in conjunction with a APF (Advanced Policy-based Firewall).

## Get the latest source and untar.
# cd /usr/src/utils
# wget http://rfxnetworks.com/downloads/bfd-current.tar.gz
# tar xfz bfd-current.tar.gz
# cd bfd-*
# ./install.sh

Read the README file, and edit the configuration file located in /usr/local/bfd/conf.bfd.
Find ALERT="0" and replace it with ALERT="1"
Find EMAIL_USR="root" and replace it with EMAIL_USR="username@yourdomain.com"

Edit /usr/local/bfd/ignore.hosts file, and add your own trusted IPs. BFD uses APF and hence it orverrides allow_hosts.rules, so it is important that you add trusted IP addresses to prevent yourself from being locked out.

## Start the program.
#  /usr/local/sbin/bfd -s

  • 1 משתמשים שמצאו מאמר זה מועיל
?האם התשובה שקיבלתם הייתה מועילה

מאמרים קשורים

Can I load balance servers that are behind a firewall?

Yes, in proxy mode your servers can live anywhere and as long as you can get to the real port you...

Hardware Firewall configuration

A Hardware Firewall is a network device that is connected upstream from a server. The Firewall...

How do I enable/disable my Iptables firewall?

To start IP tables on your RedHat server,# service iptables startYou can run the following...

Ranges to allow through server firewall

Frontend (public) network:Ports to allow:ICMP – ping (for support troubleshooting)All...

Configure APF Firewall

A firewall is a very good idea for a server. Though many people think that a firewall is...

Powered by WHMCompleteSolution